Dynamic Handset V2

Dynamic Handset V2

The Dynamic V2 Handset features a high-quality receiver and Dynamic microphone.

 

Not rated yet
0
  • $30.95
 
In stock(664 items available)

The Dynamic V2 Handset features a high-quality receiver and Dynamic microphone. The handset is constructed of durable ABS plastic combined with a high strength stainless cord and steel lanyard.  The Dynamic V2 handset includes a high-impedence dynamic microphone. For applications which require a microphone with lower impedence, please see the Dynamic V1 handset. See technical specifications of each Dynamic handset for more info.

Each handset consist of the following elements:
- Handset type: Standard Receiver and IDR-35 Dynamic Type 2 Transmitter.
- Handset handle and cap material: ABS Plastic
- Wiring: Four 24 gauge Teflon insulated wires (2 for receiver, 2 for transmitter), with single modular plug (Optional 4 spade conductors)
- Armored Cord Assembly.: 304 Stainless Steel, Interlock style. Inside Diameter, 0.250", 6.350mm. Outside Diameter, 0.329", 8.357mm. Linear Pull Test Load, 1000 lbs., 454 kg
- Includes steel lanyard which is anchored to handset handle. Steel lanyard has a pull test load of approx. 550 lbs, 250 kgs.
- Other Components: lanyard block retainer; anti-rotation wedge; transmitter holder; blue rubber grommet to seal handset/cord connection

SD-45150H20 Standard Receiver:
- DC Resistance at 20 degress C : 145 ± 15 ohm
- Frequency Response Range: 300-3400 Hz
- Sensitivity: 100 ± 2 dB at 60mv
- Impedance: 150 ± 30 ohm at 1 KHz

IDR-35 Dynamic Type 2 Transmitter:
- Type : Dynamic Type Transmitter
- Response Range : -52 ± 3dBV
- Frequency Response : -52 ± 3dBV
- Impedance : 600 ± 120 ohm
- Electrostatic Discharge : Breakdown Volt. 15KV.Min
- Spade terminal

Custom colors, cord lengths, microphones and wire terminal/plugs are available depending on details and volume. Call 1-800-884-4835 or fill out the contact us form to inquire about custom handsets or volume quotes. 

4-pin modular connectors are supplied with most handsets at no additional cost, while supplies last. Certain handset variants which require modular connectors may require an upcharge.

Handset caps are sealed with high-strength epoxy adhesive prior to shipping, unless otherwise requested.

Master Case Qty: 30 pcs

    • SKU
      HS-DYN-V2-MOD-32
    • Weight
      1.25 lbs
  • Manufacturer
    G-TEL Enterprises, Inc.
  • Cord Length
    32", 14", 18", 24", 52"
  • Connector Type
    Modular, Spade
Customer reviews
There are no comments yet. Be the first to leave a comment
Please sign in to add review

Footer navigation